$1,500.00
Alternating Pressure Mattress System with Active Sensor Technology
Intelligent, alternating pressure relief support surface that uses a proprietary Auto-Adjusting technology, used to automatically configure air pressure based on patient weight, relieving caregivers of any manual setup and assuring maximum comfort for the patient
Group II mattress system suitable for use in the prevention and treatment of pressure ulcers
Touch pad adjustment with LED indicators
Cycle Time: 10 minutes
Fine tuning function to manually adjust the air pressure settings
Four therapy settings including, Alternating pressure, Static, Alternating Seat Inflation or Static Seat Inflation
Lockable control panel to prevent unauthorized adjustment changes
Cell-on-cell design ensures that the mattress will hold air in the lower cells in the event of a power failure, preventing the user from bottoming out
Low pressure and power failure LED indicators and audible alarms
Quilted nylon PU cover is vapor permeable and fluid resistant
Quick CPR deflation is accomplished by simply disconnecting the quick-connect hose couplings from the control unit and/or releasing CPU tabs
Electrical rating: 120 VAC/ 60Hz
UL60601-1 and CSA C22.2 listed
Air input > 8 lpm
400 lb maximum weight capacity
Designed to meet the requirements of HCPCS code: E0277
Meets CA Technical Bulletin #117 flammability requirements
1 year limited warranty
Latex Free
Learn More$1,500.00
$345.00
• Designed for the use with Alzheimer Beds. • Conveniently folds for storage• 30"; x 72"; x 2";
Learn More$345.00
$370.00
The Traveler LX incorporates the legendary Everest & Jennings® wheelchair frame with saddle-joint tubular construction and industry standard front rigging. The premium vinyl upholstery is reinforced with an extra heavy duty inner liner. This wheelchair comes in a chrome finish and provides the most effective combination K0001/K0002 wheelchair available.Standard Features• Blue premium vinyl upholstery• Chart pocket on back• “Tool Free” adjustable front rigging• Chrome finish provides a long lasting and easy to clean finish• Industry compatible front rigging• Gray non-marking tires• Two position axle and caster fork provide 2"; seat height and adjustment• Maximum Weight Capacity 300 lb – EVENLY DISTRIBUTED• Meets Medicare code K0001 and K0002Optional Features• Rear Mount Anti-tippersWarrantyTwo (2) year limited warranty
Learn More$370.00
$354.00
Everest & Jennings introduces the latest in a long tradition of quality wheelchairs. The Traveler L4 is the newest high-strength lightweight wheelchair addition to the Traveler line, a brand respected for performance and durability.The Traveler L4 is a high-strength lightweight K0004 Medicare coded wheelchair. The Traveler L4 has dual axles and multi-position caster forks for an adjustable seat height of 18 or 20 inches. The wheelchair comes standard with non-marking polyurethane tires, anti-tippers and a chart pocket.The Traveler L4 is manufactured with the same commitment to quality Everest & Jennings is known for.Standard Features• Weighs less than 34 lb without front rigging• Black nylon upholstery• Chart pocket on back• “Tool Free” adjustable front rigging• Anti-tippers come standard• Non-marking polyurethane tires• Industry compatible front rigging with heel loops standard on swingaway footrests• Flip back arms• Height adjustable back• Two position axle and caster fork provides2"; seat height adjustment• Maximum Weight Capacity 250 lb (300 lb on models with 18"; seat depth) – EVENLY DISTRIBUTED• Meets Medicare code K0004WarrantyFive (5) year limited warranty
Learn More$354.00
The Dura-Gel™ BASE 2G wheelchair cushion reduces surface pressure through the use of a support layer of non-aqueous Dura-Gel™. The cushion uses a high-density base foam for durability in combination with a medium density topper.
Features a comfortable topper with a higher density base foam
Features a specialized Dura-Gel™ center layer surrounded by comfortable foam layers on the top and bottom of the cushion
The cover is a 600 denier nylon with a fluid resistant backing to provide excellent durability.
Accommodates a wide range of body shapes, sizes and weights
250 lb maximum weight capacity
Lightweight
1 year limited warranty
Designed to meet HCPCS Code E2601-E2602 (E2601 for Sizes < 22";; E2602 for Sizes ≥ 22";)
Not made with natural rubber latex
THIS ITEM IS NON-RETURNABLE
Learn More$50.00
O2/IV Holder designed to mount onto wheelchair
Adjustable in height IV holder
Durable chrome-plated steel finish
3 month warranty
Learn More$133.20
$3,616.00
Since 1946, Lumex has been enhancing the quality of life of patients and caregivers. The Lumex Ortho-Biotic II Recliner has been made specifically for use in a wide variety of healthcare environments and comes in a beautifully designed and comfortable package. The Lumex Ortho-Biotic II Recliner is proudly Made in the USA!The Lumex Ortho-Biotic makes the care, treatment and recovery of patients more comfortable and offers caregivers greater convenience within a wide array of clinical settings.Features
Unitized Recliner Mechanism
Pull Out Patient Foot Plate
Legrest-Recline Lever
Composite Foam Seat and Back
Tente® Casters
Available with Wood Cap Arms: Series FR597G<COLOR> and Fully Upholstered Arms: Series FR597P<COLOR>
Warranty
Frame: Three Years
Mechanical Components: Three Years
Upholstered Components: One Year
Tente Casters: One Year
Specification and Dimensions:
Overall Height:
45.5"; (115.6 cm)
Overall Width:
33"; (83.8 cm)
Overall Depth:
36.5"; (92.7 cm)
Width Between Arms:
24"; (61 cm)
Arm Height From Floor:
26.75"; (67.95 cm)
Arms Height Above Seat:
Front of seat
6";, (15.2 cm)
Learn More$3,616.00
$3,616.00
Since 1946, Lumex has been enhancing the quality of life of patients and caregivers. The Lumex Ortho-Biotic II Recliner has been made specifically for use in a wide variety of healthcare environments and comes in a beautifully designed and comfortable package. The Lumex Ortho-Biotic II Recliner is proudly Made in the USA!The Lumex Ortho-Biotic makes the care, treatment and recovery of patients more comfortable and offers caregivers greater convenience within a wide array of clinical settings.Features
Unitized Recliner Mechanism
Pull Out Patient Foot Plate
Legrest-Recline Lever
Composite Foam Seat and Back
Tente® Casters
Available with Wood Cap Arms: Series FR597G<COLOR> and Fully Upholstered Arms: Series FR597P<COLOR>
Warranty
Frame: Three Years
Mechanical Components: Three Years
Upholstered Components: One Year
Tente Casters: One Year
Specification and Dimensions:
Overall Height:
45.5"; (115.6 cm)
Overall Width:
33"; (83.8 cm)
Overall Depth:
36.5"; (92.7 cm)
Width Between Arms:
24"; (61 cm)
Arm Height From Floor:
26.75"; (67.95 cm)
Arms Height Above Seat:
Front of seat
6";, (15.2 cm)
Learn More$3,616.00
Since 1946, Lumex has been enhancing the quality of life of patients and caregivers. The Lumex Ortho-Biotic II Recliner has been made specifically for use in a wide variety of healthcare environments and comes in a beautifully designed and comfortable package. The Lumex Ortho-Biotic II Recliner is proudly Made in the USA!The Lumex Ortho-Biotic makes the care, treatment and recovery of patients more comfortable and offers caregivers greater convenience within a wide array of clinical settings.Features
Unitized Recliner Mechanism
Pull Out Patient Foot Plate
Legrest-Recline Lever
Composite Foam Seat and Back
Tente® Casters
Available with Wood Cap Arms: Series FR597G<COLOR> and Fully Upholstered Arms: Series FR597P<COLOR>
Warranty
Frame: Three Years
Mechanical Components: Three Years
Upholstered Components: One Year
Tente Casters: One Year
Specification and Dimensions:
Overall Height:
45.5"; (115.6 cm)
Overall Width:
33"; (83.8 cm)
Overall Depth:
36.5"; (92.7 cm)
Width Between Arms:
24"; (61 cm)
Arm Height From Floor:
26.75"; (67.95 cm)
Arms Height Above Seat:
Front of seat
6";, (15.2 cm)
Learn More$3,522.00
$1,092.00
Robust steel grid deck sleep surface provides superior mattress support and easy to clean surface compared to traditional spring decks
Head and foot sections can be raised or lowered simultaneously or independently with one hand control
Recessed main frame offers maximum pinch point protection between grid deck and frame – reducing the risk of injury
Lightweight design weighs only 118 lbs – lightest bed on the market
Bed setup is so simple that it can save on setup time and requires minimal maintenance keeping your technicians time efficient
Patent pending integrated HI-LO mechanism makes bed height adjustment easy and reduces potential loss of parts such as HI/LO rod when used as rentals
Self contained crank for semi-electric that can be used at either end makes adjustment from low 10"; to 20"; easy and even allows for trendelenburg and slant positioning
Patent pending rail slots in frame ensure quick and proper rail placement
Single motor unit is designed for easy installation, requires less maintenance and provides the ultimate in quiet, smooth operation
Attractive, “home-like” thermo fused bed ends offer a less institutional look and eliminate a bed component that often requires frequent repair and maintenance
Features SilverSolutions- an anti-microbial technology built into the paint that protects against bacteria and odor
During a power failure, the motor can lower both the head and foot section with just a single 9 volt battery
4"; extension kit can be installed on head, foot or both to extend bed length to 84"; or 88";
Grid Deck offers the following advantages:
Much stronger frame
Better mattress support
No spring sag or bottoming out with heavier patients
Easier to clean
No connecting links or springs to lose
Technical SpecificationsTotal bed weight assembled: 118 lbMaximum patient weight: 350 lbs EVENLY DISTRIBUTED, 450 lb distributed total weight capacity including patient, mattress, rails and accessoriesOverall Bed Size: 84"; L x 35"; WLift Range: Head – 60, Knee – 30Bed Height: Min. 10";, Max. 20"; (at deck level)Warranty:Bed Frame — 5 YearsElectrical Components — 2 YearsAll Other Durable Components — 1 Year
Proudly made in the U.S.A. at our Fond du Lac facility.
Learn More$1,092.00
The Extra-Wide Clinical Care Recliner has been designed specifically for the larger resident / patient. The extra-wide seat width of 24"; and greater weight bearing capacity enables the recliner to comfortably sit and position patients up to 450 pounds.
The Series FR587W and FR587WH Recliners feature three positions for patient comfort. The fourth position is a Trendelenburg (or Shock) Position that must be activated by a caregiver — the Trendelenburg Position CANNOT be activated by a patient while in the recliner. In addition, the Series FR587W features a back that can be repositioned via the adjustment lever located on the push handle on the back of the recliner.
The first position is the Upright Position. This position is ideal for patient transport and can be used to initiate patient treatment / therapy.
The second position is the First Recline Position and is also known as the “TV” position. This position is ideal for patient treatment, rest and reading.
The third position is the Second Recline Position and is also known as the “Full Recline” position. This position is ideal for patient treatment, rest and reading.
Dual gas cylinders give smooth power assistance for back position adjustment and Trendelenburg activation.
Ergonomically designed padded armrests for added patient comfort.
Four Tente® swivel casters facilitate transport and maneuverability in confined areas. Three total locking casters with easy to locate black locking tab lock wheel and swivel with single motion. Directional wheel lock with high visibility green tab allows recliner to track straighter with less effort during transport.
Durable, high-impact side tables sit flush with recliner arm to conveniently hold prep materials. Easy to actuate by caregiver. Side table surface is smooth and features tapered edges for easy cleaning.
450 lb maximum weight capacity, EVENLY DISTRIBUTED.
Available With Heat and Massage Option.
Specifications
Overall Height
50";
Overall Width
33";
Overall Depth
Learn More$3,870.00