BED PKG SE ROLL FOAM HR PL END LUMEX

Robust steel grid deck sleep surface provides superior mattress support and easy to clean surface compared to traditional spring decks

Head and foot sections can be raised or lowered simultaneously or independently with one hand control

Recessed main frame offers maximum pinch point protection between grid deck and frame – reducing the risk of injury

Lightweight design weighs only 118 lbs – lightest bed on the market

Bed setup is so simple that it can save on setup time and requires minimal maintenance keeping your technicians time efficient

Patent pending integrated HI-LO mechanism makes bed height adjustment easy and reduces potential loss of parts such as HI/LO rod when used as rentals

Self contained crank for semi-electric that can be used at either end makes adjustment from low 10"; to 20"; easy and even allows for trendelenburg and slant positioning

Patent pending rail slots in frame ensure quick and proper rail placement

Single motor unit is designed for easy installation, requires less maintenance and provides the ultimate in quiet, smooth operation

Attractive, “home-like” thermo fused bed ends offer a less institutional look and eliminate a bed component that often requires frequent repair and maintenance

Features SilverSolutions- an anti-microbial technology built into the paint that protects against bacteria and odor

During a power failure, the motor can lower both the head and foot section with just a single 9 volt battery

4"; extension kit can be installed on head, foot or both to extend bed length to 84"; or 88";

Grid Deck offers the following advantages:

Much stronger frame

Better mattress support

No spring sag or bottoming out with heavier patients

Easier to clean

No connecting links or springs to lose

Technical SpecificationsTotal bed weight assembled: 118 lbMaximum patient weight: 350 lbs EVENLY DISTRIBUTED, 450 lb distributed total weight capacity including patient, mattress, rails and accessoriesOverall Bed Size: 84"; L x 35"; WLift Range: Head – 60, Knee – 30Bed Height: Min. 10";, Max. 20"; (at deck level)Warranty:Bed Frame — 5 YearsElectrical Components — 2 YearsAll Other Durable Components — 1 Year

Proudly made in the U.S.A. at our Fond du Lac facility.

Introducing the new Patriot Full-Electric Homecare Bed with a grid sleep surface!Designed and engineered by the same team who develop the GF Long Term Care beds.Sleep surface is MADE IN THE USA!The single-motor design homecare bed is now available in a full-electric/low version. The Patriot Full-Electric Homecare Bed offers the same features as the Patriot Semi-Electric Homecare Bed with the additional feature of electric height adjustment. This makes it easier for caregivers to raise and lower the bed for patient care and linen changes. The electric height adjustment also enables the patient to easily position the bed for maximum comfort. The Full electric model can be adjusted to be a conventional height homecare bed OR a low bed for better inventory management!

Total assembled bed weighs only 178 pounds (bed and motor).

Powerful DC motor for effortless height adjustment.

Hi-Lo motor comes pre-installed on foot section for easy

set-up and disassembly.

All functions fully-integrated into convenient

handheld pendant.

Welded motor-guard protects motor and universal joint from damage during shipment and deliveries.

Available with Fiberboard Decorative Walnut Bed-ends or High-impact Plastic Bed-ends.

Designed to meet the requirements of applicable HCPCS codes.

Maximum patient weight 350 lbs.

450 lb evenly distributed total weight capacity including patient, mattress, rails, and accessories.

Height Adjustment:

Casters in Low Position:Min. 9.5";, Max. 20"; (at deck level)Casters in Standard Position:Min. 13";, Max. 23.5"; (at deck level)

Overall Bed Size: 87"; L x 36"; W.

Lift Range: Head – 60°, Knee – 30°.

No external pinch points!

Slots in frame to ensure proper rail placement.

Locking pins secure bed ends to sleep deck.  Attached lanyards prevent loss while moving or storing.

Only homecare bed to offer a 4-inch extension kit that can extend either the head, foot, or both head and foot decking.  Bed length will be 84"; with one kit, 88"; with 2 kits.

The only homecare bed to offer optional corner mattress retainers.

Grid Deck offers the following advantages:

Much stronger frame.

Better mattress support.

No spring sag or bottoming out with heavier patients.

Easier to clean.

No connecting links or springs to lose.

NOTE:

Half-Rail A (GF6650A-1 will not work on the Full-Electric Patriot homecare bed when the bed is used as a Low Bed.  You would be unable to lower the rail completely.

Learn More

Robust steel grid deck sleep surface provides superior mattress support and easy to clean surface compared to traditional spring decks

Head and foot sections can be raised or lowered simultaneously or independently with one hand control

Recessed main frame offers maximum pinch point protection between grid deck and frame – reducing the risk of injury

Lightweight design weighs only 118 lbs – lightest bed on the market

Bed setup is so simple that it can save on setup time and requires minimal maintenance keeping your technicians time efficient

Patent pending integrated HI-LO mechanism makes bed height adjustment easy and reduces potential loss of parts such as HI/LO rod when used as rentals

Self contained crank for semi-electric that can be used at either end makes adjustment from low 10"; to 20"; easy and even allows for trendelenburg and slant positioning

Patent pending rail slots in frame ensure quick and proper rail placement

Single motor unit is designed for easy installation, requires less maintenance and provides the ultimate in quiet, smooth operation

Attractive, “home-like” thermo fused bed ends offer a less institutional look and eliminate a bed component that often requires frequent repair and maintenance

Features SilverSolutions- an anti-microbial technology built into the paint that protects against bacteria and odor

During a power failure, the motor can lower both the head and foot section with just a single 9 volt battery

4"; extension kit can be installed on head, foot or both to extend bed length to 84"; or 88";

Grid Deck offers the following advantages:

Much stronger frame

Better mattress support

No spring sag or bottoming out with heavier patients

Easier to clean

No connecting links or springs to lose

Technical SpecificationsTotal bed weight assembled: 118 lbMaximum patient weight: 350 lbs EVENLY DISTRIBUTED, 450 lb distributed total weight capacity including patient, mattress, rails and accessoriesOverall Bed Size: 84"; L x 35"; WLift Range: Head – 60, Knee – 30Bed Height: Min. 10";, Max. 20"; (at deck level)Warranty:Bed Frame — 5 YearsElectrical Components — 2 YearsAll Other Durable Components — 1 Year

Proudly made in the U.S.A. at our Fond du Lac facility.